What are the operating precautions for flexible feeding?

With flexible feeding, we can see from its name what it is used for. As a mechanical device, it has many advantages and functions, but there are also many things to pay attention to when operating. For example, flexible feeding is a supporting auxiliary machine required by plastic processing machinery. The machine can also directly transport powder or granular plastic raw materials into the hopper during operation. Of course, it is also a special equipment for adjusting the mixer. In the future, when the machine sees it, it must know that it is made of stainless steel in contact with the material, and the raw material is not polluted during the conveying process, and no foreign matter is brought into it, which can realize fully enclosed automation in the production process.

Flexible feeding is safe and convenient in operation and can be moved. For example, if multiple mixers use the same raw material, only one is needed for multiple use, and it can be used for feeding multiple mixers at the same time. The flexible feeding adopts the new pitch technology to improve the conveying capacity of the screw feeder, and the anti-loosening of its screw shaft is mainly completed by the front support. There is a thrust bearing in the front support. With it, set screws can be added on both sides of the front nut to enhance the anti-loosening effect. In order to prolong its life, it is recommended that you turn on the two-speed selector switch on the panel of the feeding electrical control box. Of course, the switch here is a two-way switch, turning "left" is on, and turning "right" is off.

In addition, its electrical box is equipped with 6-bit time, minute and second control, and before the flexible feeding power is turned on, the work and rest time suitable for the feeding of the machine will be set. In addition to paying attention to these places, it also needs to do its maintenance. For example, in the feeding work, if it is found that there is a phenomenon of poor conveyance and blockage, it is recommended that the staff stop work immediately, open the discharge door, and of course, the feeding motor is reversed, and the blocked feeding pipe is discharged. Materials or sundries, clean the feeding tube.